Products
SMT Adapters
BrownDog Adapters for surface mount (SMT) electronic devices.
Showing 1–12 of 21 results
-
SO8 to DIP8 Adapter – 970601
Select optionsConvert any surface mount component in the SO8/SOP8/SOIC8 package to an 8-pin DIP footprint with the BrownDog 970601 SO8 to DIP8 adapter. This adapter features direct pin-to-pin correspondence and a low-profile, compact form factor. Available with a selection of optional audio op amps installed.
-
Single-to-Dual Op Amp Adapter – 020302
Select optionsThe BrownDog 020302 single-to-dual op amp adapter integrates two single-channel SO8 op amps into a dual-channel DIP8 footprint. One op amp mounts to the top, and the other mounts to the bottom. Available with optional audio op amps installed!
-
RC4136 Upgrade Adapter – 060601
Select optionsThe BrownDog 060601 RC4136 upgrade adapter replaces the RC4136 op amp using two conventional dual-channel op amps in the SOIC-8 package. Available with a selection of pre-mounted dual-channel op amps.
-
Dual-to-Quad Op Amp Adapter – 070401
Select optionsThe BrownDog 070401 dual-to-quad op amp adapter replaces a standard quad (4) channel op amp in the DIP14 package using two dual-channel op amps in the SO8 package. This adapter is available unpopulated, or with a selection of dual-channel op amps pre-mounted to it.
*NOTICE: Some customers are confusing this standard quad op amp adapter with the RC4136 adapter, p/n 060601. Please see the schematic below to verify the pinout for your application.
-
RC4739 Upgrade Adapter – 180801
Select optionsUse the BrownDog 180801 RC4739 upgrade adapter to replace RC4739 and pin-compatible MC1303 and μA739 op amps using one standard dual-channel op amp in the SO8 package. Features an 0805 SMT pad for an optional bypass capacitor between the supply voltage rails. Available with a selection of pre-mounted dual-channel op amps.
-
8-pin SOIC/DIP to SIL Adapter – 060301
Select optionsReplace an 8-pin SIL (single inline) component with an equivalent 8-pin DIP or SOIC part using the BrownDog 060301 adapter. This adapter features direct pin-to-pin correspondence and can accommodate both DIP8 and SOIC-8 components. Available with an 8-pin DIP socket or a selection of audio op amps installed.
-
TA7136 Upgrade Adapter – 111002
Select optionsThe TA7136 op amp is a single channel op amp in a 7-pin SIL (single inline) package. The BrownDog 111002 adapter allows for the replacement of TA7136 op amps with modern single-channel op amps in either the SOIC-8 SMD package, or the 8-pin DIP package. Available with an 8-pin DIP socket or with a selection of single-channel audio op amps installed.
-
HA1457 Upgrade Adapter – 140901
Select optionsThe HA1457 op amp is a single-channel op amp in an 8-pin SIL (single inline) package that was produced by Hitachi for use in hi-fi audio. The BrownDog 140901 adapter replaces HA1457 (and HA12017) op amps with modern single-channel op amps in either the SOIC-8 or DIP8 package. Available with an 8-pin DIP socket or an OPA604 single-channel audio op amp installed.
-
SIL Single-to-dual Op-Amp Adapter – 040701
Select optionsThe BrownDog 040701 adapter maps the pins from two single-channel op amps in the SOIC-8 SMD package to the pinout of a dual-channel SIL (single inline) op amp with 8 pins in a single row. Both op amps (U1 and U2) mount to the front surface.
-
TA7322 Upgrade Adapter – 190701
Select optionsThe TA7322 op amp is a single channel op amp in a 9-pin SIL (single inline) package that was produced by Toshiba for audio applications. The BrownDog 190701 adapter replaces TA7322 op amps with modern single-channel op amps in either the SOIC-8 or 8-pin DIP package. Available with an 8-pin DIP socket or with a selection of single-channel audio op amps installed.
-
VSSOP/MSOP-8 to 8-pin DIP Adapter – 030502A
Select optionsThe BrownDog 030502A adapter converts any surface mount component in the MSOP-8, VSSOP-8, SOT23-8, or Micro8 package (with 0.65mm pin pitch) to an 8-pin DIP footprint. This adapter has direct pin-to-pin correspondence and can be installed into standard 8-pin DIP sockets, solderless breadboards, or anywhere an 8-pin DIP component can be installed.
-
SC70-8 to 8-pin DIP Adapter – 030502B
Select optionsConvert surface mount SC70-8 components to the 8-pin DIP footprint with the BrownDog 030502B adapter. This adapter features direct pin-to-pin correspondence and can be installed into standard 8-pin DIP sockets, solderless breadboards, or anywhere with a land pattern for an 8-pin DIP component.